Hi Fergy
Sorry for the late reply. It's been a busy winter here in buffalo ny
I appreciate the offer but I actually have my design in mind which is ba...
I have some playback announcement devices that can be dropped into a local NION (at each school) or could be located in the Main NION at the core. th...
Sorry, but the CAB 4n use a special DLM firmware that you can't change because it is programmed for 16x16 channels and not the NION's 32x32.
And befor...
Greetings
I currently have a nion6 that I've kept at 1.7.2 just for the sake of this experiment.
I've acquired a dante card from a cab4n unit, and wou...
Hi Folks, I need to open that one again.
I got myself a new Nion 6 frame from ebay, that came just with the cobra net card. I swapped the cobra net ca...
The NION is in "Off" state. Apply power and after it has stabilized in Off, press the power button to turn it on.
When power is applied to a NION n6,...
Hello everyone, maybe someone has an idea on how to revive my Nion6. It is not booting up any more. Applying power to it lights up the display, the fa...
Not sure if this is kosher or not, but, since nobody else has started one, here is a post to discuss issues or bugs found with 3.0 so far...
Opening a...
Network switches will "Shut" (turnoff) an Interface because it sees the "I'm a NION and here is everything important" multicast network packet as a br...
Hi guys, I just converted a Nion3 from Cobranet to Dante and I can't seem to find the latest firmware for the DLM - Card anywhere. The Card is found b...
We are alive and well, with a new DSP engine on the way. Several new Dante/AES-67 edge devices coming out the pipe, along with new control computers....
So... being that i've been trying to get in touch with support for a week... and we havent seen ANY update on software in years... is it safe to assum...
Im runningi a system using a dozen n6 using a dante audio network.
I've been struggling for a little while with packet loss on the receive side of som...
Hello everyone,
I just lost a couple of the mini euro connectors from my Nion 6 and wonder what the exact grid dimension I'd need to get me some new o...
Note that this is a problem that happens every time I start the nion and NWare. Reboot does nothing.
The troubleshooting guide didn't help. More speci...
I suspect your problem is Pandad, which is discussed in this topic on our Knowledge Center.
http://peaveyoxford.com/kc/index.htm#3863
There is trouble...
Hi all,
I just managed to setup my nion nx. This is my first time using mediamatrix. I have configured the IP-settings and are able to see it in NWare...
Hi Fergy,
You have been fantastic at responding back to me, so many thanks to you , but incase you have
or anyone has misunderstood my posts, please l...
Well a very small detail in the docs was the problem. I was simply following the instructions exactly.
It mentioned this info ,
C:\Program Files\Media...
I cant seem to figure this one out.
An auto start shortcut for nware2.0.0 into full screen kiosk mode.
Yes, I have done this a lot with 1.7.2 with muc...
My apologies, I did not realize that you replied back.
We end up dropping the 2 separate vlan idea and dedicated an AV wireless
connection into the 1 ...
I used to be good at this back when I sold them.
getting this error after trying to deploy a test project.
Project: test2
Role: NION #1
Audio: off : e...
2 2" jbl 2445's at full boat because of some ones and zeros not lining up right would be a problem lol. Seems like its always layer one ( guess who's ...
Im sorry that was so broad and unclear.
I am wanting to use this nion in an amp rack that I use either in my home theater or on a band stage. One file...
Our proprietary discovery process that we use incorporates a "multi-cast", which is not allowed to cross between VLANs. We call it Pandad.
That said,...
We have set up an N6 nion over a virtual lan set up.
The nion n6 project is up and running ok and we can connect directly at this point to the networ...
Fergy wrote:
Had a question via email that I figured should also be posted on the Forum.
The NION draws around than 125 watts using 4 AEC cards with p...
Hello, this might be a pretty noob question, but I can't for the life of me not find a way to get my tcp/ip client to log a user in onto my nion6.
I g...
Hello, yes the ntouch180HD is capable of this task. You just need to drag in a 180HD block, and a comms processor block (the 180HD is already set to ...
Sometimes the IT Department will ask what Ethernet Ports are used by NWare and NIONs.
The list of all Ethernet ports used by NIONs and NWare can be fo...
What if the default IP Address of the NION nE (which does not have a front LCD screen) has been changed (the default IP; 10.7.5.75 but a few may be 10...
To answer your question; No, don't do that. You would have all of the NIONs trying to sync to the NTS, then sync to each other ALL THE TIME, which co...
Fergy wrote:
Had a question via email that I figured should also be posted on the Forum.
The NION draws around than 125 watts using 4 AEC cards with p...
Hi Fergy
We have 6 Nion's in our network with 1 set to a time server and the other 5 set to normal. All the normal ones are ahead still by 30 secs or ...
This thread was brought to my attention today, and I wanted to bring it up-to-date.
With NWare 2.0, if you set the time to be NTP from the Web Interfa...
Because we frequently get calls saying “I have a new job and there are NIONs in the sound system” …
It is also good for service techs as a refresher w...
Had a question via email that I figured should also be posted on the Forum.
The NION draws around than 125 watts using 4 AEC cards with phantom power ...
We have 2 Nion N6s linked and they muted in the middle of a performance this past Sunday. Tried restarting and they operating normally for about 20min...
#1 = Because the NION's firmware is also stored on the CF, when you move the flash from his NION to yours, the firmware will move with the flash. Bot...
Fergy wrote:
#1 = True, with couple restrictions. (snip)
If they match, this would be the quickest, easiest path to solution.
N3 to N3, so no issue t...
#1 = True, with couple restrictions. If you have the NION nX or nE, and they have the n3/n6, then there would be some changes required to the pion-co...
Hi folks,
I have a fellow church tech friend whose NION N3 is failing, and as I have a couple available that our church recently decom'd I'm helping h...
As trivial as this question may be, I pose it anyways.
I'm configuring Dante cards with network addresses on several nion n6'.
The audio network led ...