18y ago
When using the Gain Sharing Automixer device, open the "Device Properties" and check the "Highpass Filters on Inputs" box.
When you actually run audio through the device you will notice that the audio is high-passed at 800Hz and there is not a control to adjust it. You actually have to go into the "Schematic" page and adjust each of the "High Pass" filters to your desired frequency.
Either there should be a global adjustment for this on the controls page somewhere, or it should be preset to something like 150Hz. 800Hz is just WAY too high in this case. However, I do understand that this is the "out-of-the-box" setting for the general "High Pass" filter.
plz fix for the next release.
k?thx.
-Josh